Company activities
imaging systems
pco representative
electronic equipments
fusion research
References
references
Adimtech has taken over the digital camera business of CAT-Science. The table below lists some refernces of CAT-Science. Fusion resarch projects of the KFKI Research Institute for Particle and Nuclear Physics (KFKI RMKI) provide references for fusion research. Please look at magfuzio.hu for fusion activities of KFKI RMKI.

Multiple camera measurement system for the W7-AS stellarator.
Available Descriptions format size last update
halpha_doc.pdf pdf 2.3 MB 30/03/2008
halpha_doc.ps ps 3.7 MB 30/03/2008
Institut für Plasmaphysik, Garching bei Munchen, Germany


Tomographic evaluation of X-ray measurement data for the TCV tokamak.
Centre de Rescherches de Plasma, Ecole Polytechnique Lausanne, Switzerland


Tomographic evaluation of bolometric measurement data for the TCV tokamak.
Centre de Rescherches de Plasma, Ecole Polytechnique Lausanne, Switzerland


System analysis of the CO_2 laser scattering diagnostic of the W7-AS stellarator.
RISO National Laboratory, Coppenhagen, Denmark


Scientific consulting, measurements and fluctuation data evaluation for the W7-AS stellarator.
RISO National Laboratory, Coppenhagen, Denmark


Data acquisition system and data evaluation programs for the CO_2 laser scattering diagnostic of the W7-AS stellarator.
RISO National Laboratory, Coppenhagen, Denmark


Infrared camera data acquistion system for the TCV tokamak. This project involved design and manufacturing of hardware (CAMLINK , MERLIN-TRIG) and software and integration of the system into the TCV environment.
Centre de Rescherches de Plasma, Ecole Polytechnique Lausanne, Switzerland


Integration of Dalsa CL-C6 fast line cameras (max. line rate: 5kHz) into the environment of the W7-AS stellarator. Timing hardware (CAMTIMER) was manufactured by CAT-SCIENCE. The software was integrated using our CrossControl communication package.
Institut für Plasmaphysik, Garching bei Munchen, Germany


Full software package (Windows and Microcontroller) for autonomous data collection system. The microcontroller programs were written for the Infineon C505CA in Keil C. Communicatoion between the MC and the computer is done via CAN bus. Documentation was done in German.
Diehl GmbH, Röthenbach, Germany